Turbobond Filler cyanoacrylate adhesive Turbobond Filler is a chemical weld

TURBOBOND Filler

chemical weld

Characteristics:
For bonding and filling, tears, joints, cracks, holes, etc. in combination with TURBOBOND Powerglue.

Application:
Either apply the TURBOBOND Filler or TURBOBOND Powerglue first (do not mix). The TURBOBOND Powerglue immediately reacts with the TURBOBOND Filler. After the reaction, there is no time to make a correction. Apply in layers of approx. 2mm and make sure that the TURBOBOND Filler is completely saturated with the TURBOBOND Powerglue. Repeat adding TURBOBOND Filler and TURBOBOND Powerglue if necessary. Blind off holes or corners with adhesive tape. After hardening remove the adhesive tape. The material can be mechanically processed after approx. 3 minutes eg. sanding and painting.
Do not let the two tube tips get in contact with each other to avoid clogging.

Storage:
Store dry.
Non-aging.

Size:
30g Bottles.

Put on TURBOBOND Filler and soak thoroughly with TURBOBOND Powerglue.

The stability of a joint like this, which is usually impossible, can be obtained by using TURBOBOND Filler.

Knocked out or broken off materials can be refilled using TURBOBOND Filler and TURBOBOND Powerglue.

TURBOBOND Powerglue in combination with, TURBOBOND Filler is perfect to refill and replace broken off material of any kind.